Flat Mdf Composite Door Jamb Set
The existence of irregularities in wall openings and poor plumbness leads to irregularity in the spacing between the wall and door jambs, making the installation require extra time of 1.5 to 2 hours per jamb in order to fill putty, sand, dry, and paint. Despite multiple corrections done, joints usually remain either cracked or misaligned, affecting the quality of the installation.
Our prefabricated three pieces MDF jamb kit is cut at 45° mitre alignment, taking less than 10 minutes of installation without requiring any cutting work on-site. Our design has an extra 50 mm on both sides, making it possible to absorb any deviation in the openings up to ±30 mm and wall plumbness of up to 5 mm/meter; hence, all rough edges and openings are made uniform with the smooth flat surface without requiring filling putty, sanding, and painting. The installation process would take only 40-60 minutes, saving 1.5 to 2 hours per door installation.
Products Description
| Product Name | Flat Mdf Composite Door Jamb Set |
| Moisture Content | 8%-12% |
| Packing Method | Products are packed with shrinkable PVC film and plywood pallets to ensure safe transportation and reduce damage during shipping. |
| Production Capacity | 120 Forty-Foot Container per Month |
| Production Time | 45 days after order confirmation |
| Sample | Free（The clients need to cover the shipping cost） |
| Tolerance | Customized size, according to the drawings; Tolerance: Width: +/-0.3mm, Thickness: +/-0.3mm |
| Payment | TT |
| Customization Capability | Size / Profile / Color / Surface Finish / Logo customization available. |
| MOQ | Our standard MOQ is a 40HQ container. However, to support trial orders, we can accommodate a 20GP container with the flexibility to mix 4 different products. |
Products structure
Company introduction
Xiamen Reshine Wood Industry
Year Established：2008 (16+ years in wood moulding)
Factory Area: 18,000 m² (covered production + warehousing)
Production Lines：6 fully automated moulding lines + 4 sanding/painting lines
R&D Team：12 senior engineers + 8 quality control technicians
Production Capacity (Door Jamb Line): 120 x 40HQ containers per month;
Total Factory Capacity (All Lines): 200 x 40HQ containers per month
Certifications：ISO 9001:2015 (Quality), FSC® (Forest Stewardship Council),
CARB Phase 2 (low formaldehyde), CE (European safety),
SGS test reports
Export Markets：USA, Canada, Germany, France, UK, Australia, Japan,
South Korea, Middle East, Southeast Asia (35+ countries)
Our Partners： Home Depot suppliers (US), Bunnings (AU), Leroy Merlin (EU),
and 200+ distributors worldwide
Why choose our Flat MDF Composite Door Jamb Set
Prefinished Surface
The prefinished door jamb set has a primer coating already applied at the factory (≥30 μm DFT, ISO 2409 Class 1 adhesion). No sanding or priming is necessary prior to painting.
Moisture-Resistant MDF Core
Produced using dense MDF with a 24-hour swell of ≤6% (ASTM D1037) – suitable for interior use, including hallways and bedrooms. In the kitchen or bathroom and any moisture-prone environments, an additional MR (Moisture-Resistant) MDF model is available.
Engineered Dimensional Accuracy
Width and thickness have tolerances of ±0.3 mm; length tolerance is also confirmed to industry standards (ANSI/WDMA I.S. 1-A). Consists of head and side jambs that match in size and create a precise square fit for standard door openings.
In-Built Hardware Accommodations
Factory-drilled holes for hinge and strike plates and pre-installed knockdown connector screws make the installation process much faster. Jamb components lock together with no need to do complicated mortise work.
Lightweight and User-Friendly Design
Up to 35% lighter than comparable solid wood jambs – decreases physical strain of carrying around and installing the set. Coupled with a prefinished surface and hardware locations, the door jamb opening can be installed within 30 minutes.
Our Service
Free sample available (shipping cost covered by client)
100% dimensional and surface inspection before packing
Dedicated support with 24-hour response time
On-time delivery with reliable production scheduling
FAQ
1. Do you provide samples before bulk orders?
Yes, samples can be provided in order to check the quality and profile before starting the large-scale production.
2. Can you customize products according to drawings?
We are open to OEM and customized production based on customer drawings, samples, or specifications.
3. Can you add our logo or private label on the packaging?
Yes, we offer customized branded items, tags, barcodes, and exclusive packaging.
4. What payment methods do you accept?
We usually accept T/T payment. Other payment methods can be discussed based on cooperation requirements.
5. What is your standard lead time?
Standard lead time: 45 days after order confirmation. Custom profiles: 45-65 days depending on tooling complexity
6. How are the products packed for export?
Products are packed with shrinkable PVC film and plywood pallets to ensure safe transportation.
7. Do you support mixed container loading?
Yes, we can arrange mixed loading for different moulding and interior wood products.
8. What shipping methods do you provide?
Working mainly through sea freight, we can handle most of the container shipment arrangements and also assist in export and shipping.
9. Can you produce primed and painted finishes?
There are raw, primed, and pre-painted options available in our product line upon the customer's choice.
10. What is the MOQ?
One 40HQ container is the standard MOQ for us. To allow customers more flexibility in their product choices while still keeping efficient production and shipping, they are allowed to mix up to four different types of products from our range within the same container.
