Interior Pine Wood Door Jamb
1. User Pain Points
Contractors usually consider solid pine jambs a real hassle because of:Fuzzing & Tear-out - Pine that is cut on-site generally leaves rough ends which are fuzzy and you would have a lot of sanding to do before painting. Warping/Twisting - Solid wood reacts to humidity changes differently which can lead you to the point of having gaps that will need shimming on different levels and that takes time. The end-grain of pine uses up so much primer that the product may look spotted and this will ultimately ruin the finishing.
2. Our Solution
Our factory processed Pine Door Jambs have resolved your on-site problems.
significantly reduces fuzzing and tear-out compared to untreated jambs, provided standard sharp blades are used and the paint will take evenly - there won t be any dark spots.
Kiln-dried and milled with precision This means you get a straight and stable material and you ll spend a lot less time fiddling around with the fit on-site。
Pre-primed and Sanded two coats of primer has been applied and sanded to 180 grit. Only cutting, fitting and topping are required.
Products Description
| Product Name | Door Frames / Door Jamb |
| Size | 11/16 in. x 4-9/16 or as customized (Thickness × Width) |
| Materials | Pine/ Fir/ LVL/ MDF |
| Density | ≥700kg/m³(MDF/LVL) |
| Tolerance | +/- 0.8 mm |
| Production Capacity | 200 Forty-Foot Container per Month |
| Customization Capability | Size / Profile / Color / Surface Finish / Logo customization available |
| MOQ | Our standard MOQ is a 40HQ container（However, to support trial orders, we can accommodate a 20GP container with the flexibility to mix 2-3 different products.） |
| Moisture Content | 8-12% |
Production Process
1. Raw Material Selection-Incoming timber tested for moisture content (8%-12%) and density
(>700kg/m³). Material outside these ranges is rejected.
2.Kiln Drying- Kiln-dried to 8%-12% moisture content for dimensional stability.
3. Material Conditioning - Stored for 20+ days to stabilize moisture content uniformly.
4. Finger Jointing & Profiling - Defects removed, finger-jointed, shaped by precision moulders.
5. Sanding & Priming - Sanded smooth, two coats of primer with intermediate sanding
6. Quality Inspection- 100% inspection on critical dimensions and surface defects before packing before packing.
7. Packaging - Shrink-wrapped, edge-protected, and palletized for container shipping.
Customization Services
We offer full customization to match your project requirements:
Dimensions: Height, width, thickness tailored to your wall thickness and door size
Profiles: Flat, stepped, decorative, or custom cross-section
Material: Pine / Fir / LVL / MDF
Surface Finish: Raw / Primed / Pre-painted (RAL/Pantone matching)
Packaging: Standard / Custom branded with logo and private label
Customization Process:
1.Provide drawings, samples, or specifications →
2. Engineering review and confirmation (2-3 business days) →
3. Tooling development (10-15 days for new profiles) →
4. Sample production and approval (7-10 days) →
5. Bulk production (45-65 days depending on order size)
Sample Policy
● Cost of Sample: Free (Standard Profiles)
● Freight Charges: Client responsible
● Lead Times for Sample: 5-7 days for standard profiles; 10-15 days for custom profiles
● Recommendation: Our advise is that you order samples beforehand in a bulk production run so that quality of material, profile, and finish can be confirmed.
Shipping&Logistics
Loading Port: Xiamen, China
Delivery Term: FOB Xiamen/CIF destination port
Estimated Transit Time: USA (West Coast):18-22 days; Europe:30-35 days; Australia:18-22 days
Packaging & Ocean-Worthy Protection:
All boards are professionally packed together with moisture-resistant films, corner protection strips and edge protection in sturdy bundles. Container loading is always carefully done under supervision to prevent movement, shifting of cargo during transportation. Optionally, desiccant packs which are used for moisture control can be provided if the destination is a humid area.
Payment: 30% deposit + 70% on BL copy by T/T or L/C at sight
FAQ
1. Can you provide samples before bulk orders?
Yes, samples are available. Standard samples are delivered free of charge, custom samples on the other hand are manufactured and provided in quantities charged at material and labor costs (refundable upon fulfillment of a bulk order). Lead time for sample production: standard product sample production - 5-7 working days, custom product sample production- 10-14 days. The shipping cost is at the buyer's expense.
2. Can you customize products according to drawings?
Yes, It is our specialty in OEM and customized production of the customer drawings, samples, or specifications.
3. Can you add our logo or private label on the packaging?
Yes, we offer customized branded packaging with your logo, private labels, barcodes, and shipping marks.
4. What payment methods do you accept?
We accept T/T (30% deposit + 70% balance against BL copy) and L/C at sight. Other methods can be discussed upon cooperation.
5. What is your standard lead time?
Lead time is usually 45 days from the date the client confirms the order. Custom profiles - from 45 to 65 days, depending on the complexity of the tooling needed for this.
6. How are the products packed for export?
Shrinkable PVC sheet is used to cover the wood products followed by corner protection straps and finally the whole thing is put onto pallets made of hard wood in order to safely transport the products.
7. Do you support mixed container loading?
Yes, We can mix various types of moulding and solid wood products in the container shipment.
8. Can you produce primed and painted finishes?
Yes, raw, primed, and pre-painted options are available upon request.
9. What is the MOQ?
Standard MOQ is a 40HQ container. For trial orders, we can accommodate a 20GP container with the flexibility to mix 2-3 different products.
10. What is your main market?
USA, Canada, Australia, Europe, and 35+ other countries worldwide.
About Us
Our woodworking team has more than 16 years+ of experience in manufacturing, focusing on the production of high-quality decorative millwork products like wood doors,
wood door frames, wood door sills, and architectural woodwork.
Our main products include:
Crown mouldings
Baseboards and quarter round profiles
Window and door casings
Door jambs and custom wood solutions
We proudly present our products in North American, European, Australian, Canadian, and several other world markets. By having strong manufacturing capabilities, we have served
1,000+ customers worldwide. Throughout the last five years, our company has been able to grow by more than 30% year to year consistently while maintaining a stable export
capacity of 200+ containers/month.
Our Certificates
We have been certified with a number of international quality and safety standards, i.e. ISO 9001:2015 (Quality), FSC® (Forest Stewardship Council), CARB Phase 2 (Low Formaldehyde Emission), and also we have obtained CE Mark certification which shows in fact that we are not only dedicated to responsible sourcing but also to meeting European market requirements. In addition to all these certificates and supporting documentation, our products meet the market regulatory requirements, as well as the needs for the customer to be sustainable.
Contact Us
